This page contains all of the drawings, documentation and spreadsheets that were used to build the Super2. Adobe PDF, Microsoft Word and Microsoft Excel are the file formats used. The majority of the drawings are 'B' sized, that is 11" X 17". They can be printed at smaller size for reference, but the template drawings will need to be printed "B" size if they are to be used as actual size templates. Some of the larger parts use tiled drawings. These requires several 'B' sized drawings taped together to get a full sized template. The files are organized by the manual chapter that they are refrenced in. To download a file, right click on the filename and select 'Save as'.
The entries in blue have been completed and are active links, the entries in black are under construction.
Chapter 2 - Section 1 - Horizonal Stabilizer
- Horizonal Stabalizer 3D Plan
- Rib 1:1 Template Sheet 1 of 3
- Rib 1:1 Template Sheet 2 of 3
- Rib 1:1 Template Sheet 3 of 3
- Horizonal Spar
- Elevator Spar
- Leading Edge
Chapter 2 - Section 2 - Vertical Stabalizer
- Vertical Stab 3D plan
- Vertical Stab Spar
- Vertical Stab Ribs - sheet 1 of 3
- Vertical Stab Ribs - sheet 2 of 3
- Vertical Stab Ribs - sheet 3 of 3
- Vertical Stab leading edge spar
- Vertical Stab lower support sides - sheet 1 of 2
- Vertical Stab lower support sides - sheet 2 of 2
Chapter 3 - Section 1 - Forward Fuselage
Chapter 3 - Section 2 - Rear Fuselage
Chapter 3 - Joining the Fusleage Halves
- Firewall Drawing
- Firewall Template
- SeatBack
- Center Bulkhead
- Baggage Bulkhead 1
- Baggage Bulkhead 2
- Baggage Bulkhead 3
Chapter 4 - Fuselage Features
- Forward Deck Drawing
- Upper Engine Mount Pattern
- Lower Engine Mount Pattern
- Nose gear reinforcement Center
- Lower engine mount Center
- Lower Engine mount and Gear mount outside
- Upper engine mount top
- Upper engine mount center
- Upper engine mount bottom
- Rear Access Panel
- Fuse/Horz Stab Template sheet1
- Fuse/Horz Stab Template sheet2
- Rear Bulkhead
- Rear Tunnel Page1
- Rear Tunnel Page2
- Rear Tunnel Page3
- Rear Tunnel Page4
- Rudder Pedal Weldment
- Rudder Pedals
- Rudder Pedal Pivot Blocks
- Pivot Block Placement
- Elevator Bellcrank Pattern
Chapter 4 - Section 2 - Elevator
Chapter 4 - Section 3 - Rudder
- Rudder Assy Drawing
- Rudder Spar
- Rudder Ribs
- Rudder lower rib angle guide
- Rudder 1:1 top profile drawing
Chapter 7 - The Wing
Section 1 - Outboard Spars
- Dimensioned Outboard Spar
- Detailed Outboard Spar Detail A
- Detailed Outboard Spar Detail B
- Outboard Spar Phenolics
Section 1 - Main Spar
Section 2 - Ribs
- Rib A - part 1 of 3
- Rib A - part 2 of 3
- Rib A - part 3 of 3
- Rib B - Front
- Rib B - part 1 of 2
- Rib B - part 2 of 2
- Rib BB
- Rib C - part 1 of 3
- Rib C - part 2 of 3
- Rib C - part 3 of 3
- Rib D - part 1 of 3
- Rib D - part 2 of 3
- Rib D - part 3 of 3
- Rib E - part 1 of 2
- Rib E - part 2 of 2
- Rib F - part 1 of 2
- Rib F - part 2 of 2
- Rib G - part 1 of 3
- Rib G - part 2 of 3
- Rib G - part 3 of 3
Section 3 - Wing Assembly and bottom Skin
Section 4 - Wing Internals
